The Confluence production environment will undergo a migration from 8am-5pm ET on Saturday, May 25th. The Confluence environment will be available in read only mode. Changes to data in Confluence will not be possible until the migration is complete.
This page is just to keep old information that was originally written in the Slow Controls page Ongoing Tasks about Target Software page.
Photos of pressure sensors
Item | Location | Notes |
---|---|---|
9 | Already installed | |
8 | Pipe fitting: KF-40 Sensor fitting: 4-VCR Female Flex hose (needed because the gas port of the sensor must not be directed upward) KF40 to KF16 converter : https://locoscience.com/products/kf40-to-kf16-flanges-vacuum-fitting-conical-reducer-adapter KF16 flex hose: https://locoscience.com/products/kf16-flexible-vacuum-bellow-1000mm?_pos=1&_sid=63838aa66&_ss=r | |
5 | Pipe fitting: KF-16 Sensor fitting: 4-VCR Female Adapter: KF-16 to 4-VCR Male https://www.idealvac.com/Adapter-KF-16-to-4-VCR-Male/pp/P101374 Location: towards upside of the white piping (see the left image) | |
1 & 2 | Pipe fitting: 1000Torr (~ $ 470) KF16 to 1/2" swagelok | |
3 | This is He Vapor pressure sensor (MKS 615) | Waiting for piping |
6 & 7 | 6) Separator line from cave should be connected to: Tee: https://locoscience.com/products/3-way-tee-kf25-flange-vacuum-fitting 7) LHe vapor line from Magnet Dewar should be connected to: Adapter: https://locoscience.com/products/kf25-flange-to-1-npt-male-vacuum-fitting-adapter flex hose: https://www.amazon.com/ISO-KF-Corrugated-Bellow-Aluminum-Centering/dp/B09QGWGM2W (Qty 4) Also, need a count of various converters we already have. | |
Fermilab Tech will help us install this one | ||
10 & 11 | LANL sensors. Check with Misha | |
4 (AUX) | MKS 722B (cylinder silver) seen in the photo has been moved to the roots pump area for #5. TPR 280 will be place for #4 (AUX). We need a longer cable. |
LabView Vi's & associated information
Instrument | Hardware | Vi avail. | GitHub location(s) | Assignment | Test Status | Tested on target computer? | Notes | |
---|---|---|---|---|---|---|---|---|
1,2,3 | Flow control (HFC) for magnet, Flow control (HFC) for separator, (Main) flow monitor (HFM) for fridge | THCD-400 | In-progress | Cryo Control Panel Standalone: Temperature-Pressure-VIs/THCD_400_VIs | Kenichi Misha | Yes | ||
4 | Fridge nose level probe | AMI1700 | yes | Cryo Control Panel | Kenichi | Yes | ||
5 | Run valve | In-progress | Cryo Control Panel | Kenichi | Yes | |||
6 | Bypass valve | In-progress | Cryo Control Panel | Kenichi | Yes | |||
7 | High Accuracy Signal Conditioner: MKS 670B | For pressure sensor (MKS 690A) | Step #2 | Cryo Control Panel Standalone: Temperature-Pressure-VIs/MKS_670_VIs | Kenichi Zulkaida | Yes | ||
8 | Vacuum System Controller: MKS 946 | For pressure sensor (MKS 722B) * 2 | Step #5 | Cryo Control Panel Standalone: Temperature-Pressure-VIs/MKS_946_VIs | Kenichi Kenichi | Yes | ||
9.1 | DAQ for MCC E-TC for | Sensor: Type-T TC * 2 | In-progress | Same as #9.2 | Kenichi | |||
9.2 | DAQ for Thermocouple: MCC E-TC | Sensor: Omega Type T, at target cave | Step #5 | https://github.com/uva-spin/Temperature-Pressure-VIs/tree/main/MCC_ETC_VIs | Kenichi | |||
10 | LakeShore218 (8 channels) | In-progress | Reggie | Yes | ||||
11 | LakeShore218 (Target Insert) | In-progress | Reggie | Yes | ||||
12 | Target Lifter | In-progress | Vibodha | |||||
13 | Basic Microwave motor controller | In-progress | Vibodha | |||||
14 | EIP Frequency counter | In-progress | https://github.com/uva-spin/e1039-target-controls/tree/master/Motor%20controller | Vibodha | ||||
15 | Magnet OVC | Pfeifer Vacuum | yes | Zulkaida | ||||
18 | Magnet PS | yes | https://github.com/uva-spin/e1039-target-controls/tree/master/Magnet-PS-Control Magnet Power Supply Operation | Zulkaida/David | ||||
19 | Shim PS | yes | https://github.com/uva-spin/e1039-target-controls/tree/master/Magnet-PS-Control Magnet Power Supply Operation | Zulkaida/David | ||||
20 | Mercury iTM | yes | Misha | |||||
21 | Mercury iTC | N2 level | yes | https://github.com/uva-spin/e1039-target-controls/tree/master/Magnet-PS-Control | Zulkaida | |||
22 | MaxiGauge | TPR 280 * 5 | yes | Cryo Control Panel Standalone: Test-VIs/MaxiGaugeTesting | Kenichi Zulkaida | |||
23 | EV105-N (Electronic valve) | Fairchite TA6000-104 | no (one Vi) | Zulkaida | ||||
24 | EV102-N (Electronic valve) | Asco 8222G 002LT | no (one Vi) | Zulkaida | ||||
25 | TE107-N (Temp. Sensor) | OmegaSA1 RTD | no (one Vi) | Zulkaida | ||||
26 | TE108-N (Temp. Sensor) | OmegaSA1 RTD | no (one Vi) | Zulkaida | ||||
27 | PT106-N (Pressure Sensor) | DWIER 626-11-GH-P1-E4-S1 | no (one Vi) | Zulkaida | ||||
28 | PT110-N (Pressure Sensor) | DWIER 626-11-GH-P1-E4-S1 | no (one Vi) | Zulkaida | ||||
29 | TPG361 | Pfeiffer Vacuum | Need testing | https://github.com/uva-spin/Temperature-Pressure-VIs/tree/main/TPG361_Version2 | Zulkaida |