* Critical Path Items
| Task | Status | Notes |
|---|---|---|
| Setting up zoom meetings in the Hall | ||
| Setting up a leak checker station (in the hall in the loading dock area) | ||
| Setting up a leak checker station (in the counting-house) | ||
| Putting all turbo and vacuum piping together with backing pump | ||
| Pressure test on the shell | ||
| Setup thermocouple readout (T-type sensors) | ||
| Install cable trays and complete the connection with the magnet rack | ||
| Complete all the connections in the magnet rack | ||
| Testing each device on Magnet rack | ||
| Find out (order a long) the cable to test baratrons | ||
| Purchase additional He Flow Control | ||
| Need to figure out a long cable for the He level probe (for the fridge) | ||
| Setup in-cave He flux tube | ||
| Setup in-cave N2 flux tube | ||
| Setup He riser connections | ||
| Setup N2 riser connections |
*Non-critical Path Items
| Location | Task | Status | Notes |
|---|---|---|---|
| Counting-house work area | Find all large boxes that need to be going to the storage and arrange those to be moving to storage (the boxes that will be used frequently can be stored on top of those cupboards, other rest of all boxes can be disposed) | ||
| Find items that can be shipped to UVA | |||
| Collect all unwanted items in each cupboard and move them to different location/storage/throw | |||
Assign designated locations in those cupboards to store cables/parts/items relevant to the systems (eg: Microwave related, Actuator related, Magnet rack related, etc.) Once this is organized, there will be dedicated web page in this wiki to keep inventory list with pictures (then anyone can find anything easily) | |||
Arrange all the tables for anyone to work at any time (there shouldn't be cables/parts/screws/items etc on these tables because those should be in their designated place) | |||
| Purchase a wise and set it up on a table | |||
| Prepare the second target stick (as same as the one is hanging on the fridge-frame) | |||
Find all fittings, bolts, etc. (eg: water fitting..) stuff that we don't need, and keep those somewhere else. Organize "Swadgelocks, NPT, stuff that have KF flange" in those yellow boxes | |||
| Label all cables (using the stickers with the relevant system) and identify the cables that need to be shipped to UVA | |||
| Prepare dedicated toolboxes for NMR, Microwave, Cryogenics (there three small table-top tool boxes) | |||
| Hall - Loading dock area | Check/open all the boxes (including wooden ones) and identify which of those should go to storage and arrange moving | ||
| Clean-up loading dock area (move all pipes, boxes, items etc. to proper places to store) | |||
| Move the vacuum pump to the downstairs (right below the loading dock : area next to the beam dump in the down stream) | |||
Check whether that black tool box's lower part can be used for the leak-cheker's lower part (which has wheels), and the upper part can be used as Target Tool box in the work area next to the beam dump (where the target cups are refilled) | |||
| Hall - Cryorack | Identify and label all cables that need to be connected to all devices on cryo rack (slow controls rack) | ||
| Hall - Roots pumps (on cryo platform) | Move scroll pump (right now it is close to NM3 enclosure / upstream beamline area) to here | ||
| Design and make a small rack to hold all Vacuum pumps (scroll pump and other two pumps that are currently sitting on the platform base) | |||
| Setup a He bottle in the corner near the roots pumps | |||
| Setup the control patch panel for roots pumps in the cave | |||
| Hall - NM3/3 enclosure area (including the area under the beamline) | Clean up the area | ||
| Organize the cart that is sitting in that area only with the KF parts and other essential parts: all tools should be kept in the relevant tool box(s) | |||
| Hall - Turbopump | Move the Pfeifer Vacuum (ACP) device to here and set it up | ||
| Setup with proper flangers | |||
| Calibrate manometer and set it up in the small space close to the west penetration | |||