Josh
1.) Microwave stepper setup, reliability/repeatability
2.) Microwave frequency calibration and reliability tests
3.) Know all details of controlling VI, simulations and automation
4.) CPI power supply communication and controls VI and testing
5.) Microwave safety interlock setup
6.) Nitrogen Shield vessel Engineering Note
Zulkaida
1.) 1-D bar as Seppo suggested for better thermal simulation
2.) Completion of Quench simulations and write up
3.) VI for vacuum pressure (more important) and turbo controller (less imporant)
4.) Full analysis software for Sivers function extraction
5.) Testing magnet simulations and false asymmetries with cup/ladder/target variations
6.) Setup warning system and slow control variables to monitor for the magnet and vacuum
Carlos
1.) Finalize sensors (fridge and magnet)
2.) Actuator Controls and limit switches and positioning
3.) Design and submit material loading tub
4.) Leak check risers and vacuum space (or start whatever admin process we need to)
Anchit
1.) Make NH3 and ND3 try to optimize procedure
2.) Calculate what the heat load from the microwave and the beam is on the beads
3.) Design and perform density (thermal contraction) measurement
4.) Make cryostat tops for making material and small sample polarizing with small SC magnet
Arthor
1.) Reproduce the COMPASS dynamic dilution factor using MCFM
2.) Produce the SpinQuest dynamic dilution factor using MCFM
Liliet
1.) Analysis