Start by turning on power supply on back of NMR rack, on the bottom:

Turn on NI PXI module right above power supply 


Turn on RF Generator above NI PXI module

Behind the computer monitor, there will be an on/off switch near the ceiling inside the NMR rack. Flip that on

Turn on Oscilloscope

Turn on Desktop PC





Once PC has started, open the NI application. Once opened, open Devices and Interfaces to confirm that the below devices are connected

To open the TPS module, open the file manager and click on the file labeled 'TPS System Start.vi' located at OS(C:)\uva-spin\PDP

Once opened, click on the Labview Icon from the taskbar and navigate to the central control module as pictured below




Shutting Down NMR System

  1. Shut down PC by opening up the start menu and selecting 'Shut down'. Wait for the PC to shut down completely.
  2. Shut off the Oscilloscope.
  3. Flip off the switch behind the PC monitor
  4. Turn off RF generator
  5. Turn off PXIe module
  6. Turn off Power Supply

Now you have completely shut off the NMR system. 


  • No labels