List of primary equipment still Needed for running at Fermilab
NMR coax small connection pieces for lambda/2 tuning, Quote is here:
NMR coax cables at least 20ft long and enough cable to make 20 units with SMA connectors
Remote Control Gate Valve for regulating flow on the mechanical pump backing pump (probably VAT 642): VAT control valve
Lakeshore Readouts for temperature measurements of fridge and target stick (Need at least 3 for experiment): Lakeshore
Large Foam Tub with slanted opening on one end for LN2 (https://www.foamdesign.com/)
Six 27-pin Fischer connectors male and female with vacuum tight seal and bent housing (see target insert parts page)
Need new cold cathode gauge for high vac for magnet vacuum space (https://www.pfeiffer-vacuum.com/en/products/measurement-analysis/measurement/digiline/gauges/)
USB serial converter, lots of long serial cables, extra power cables, cables, RS-232
Target loading paraphernalia, large and small forceps, crucible tongs, large and small tweezers, 150 mm Stainless Steel Flat; Serrated Clamp, funnels, cup-top-funnel, strainers, Styrofoam cups, wooden q-tips
Need Vacuum system auxiliary connection/piping for alternative smaller turbo connections (this should be setup as an alternative connection into vacuum space to the CF)
Vacuum valve for external connection and KF to hose for N2 gas and leak checking
The pressure sensor (main manometer) did not respond correctly, this needs fixing (not sure what the issue is, seemed to be controller) and a backup setup
The Main\sep flow
Shim control needs micro-controller compatible with LabView, and patched into Magnet VI (David is looking into this)
Need more ND3
Parts for multiple Cold NMRs for testing and for experiment, cold boards, controllers, etc
Need position sensitive gate valve for before the mechanical pump
Piping and Swagelok for control as well as fridge back-fill automated controls (might need as backup annealing system)
Need safety pop-off valve for the fridge, this could be automated but non-auto mechanical valves are more reliable for safety
Dedicated Lake-shore for fridge, insert, and magnet (sticking with ITM10?), level monitor (sticking with mercury iTC?, could be iPS if use added cards)
Transfer lines for initial cooldown tests, dedicated for project to leave at Fermilab
Dedicated Computer systems and monitors for target subsystems
Chiller monitoring systems (pumps, microwave)