The Confluence production environment will undergo a migration from 8am-5pm ET on Saturday, May 25th. The Confluence environment will be available in read only mode. Changes to data in Confluence will not be possible until the migration is complete.
New Page: https://github.com/uva-spin
GitHub pages:
https://github.com/UVA-LabVIEW-Projects/LabVIEW-Projects
https://github.com/E1039-Collaboration/e1039-target-controls
LabView Vi's & associated information
| Instrument | Hardware | Vi avail. | GitHub location(s) | Assignment | Test Status | Tested on target computer? | Notes | |
|---|---|---|---|---|---|---|---|---|
| 1,2,3 | Flow control (HFC) for magnet, Flow control (HFC) for separator, (Main) flow monitor (HFM) for fridge | THCD-400 | In-progress | https://github.com/uva-spin/Temperature-Pressure-VIs/blob/main/THCD_400_VIs/thcd_400_control_1.vi | Misha (Zulkaida/Harsha) | Yes | Next Step: Connect flow control right before the KNF pump | |
| 4 | Fridge nose level probe | AMI1700 | yes | https://github.com/uva-spin/e1039-target-controls/tree/master/Cryo-Control | Zulkaida | In-progress | ||
| 5 | Run valve | In-progress | Harsha | |||||
| 6 | Bypass valve | In-progress | Harsha | |||||
| 7 | High Accuracy Signal Conditioner: MKS 670B | For pressure sensor (MKS 690A) | Step #2 | https://github.com/uva-spin/Temperature-Pressure-VIs/tree/main/MKS_670_VIs | Kenichi (& Zulkaida) | Yes | ||
| 8 | Vacuum System Controller: MKS 946 | For pressure sensor (MKS 722B) * 2 | Step #5 | https://github.com/uva-spin/Temperature-Pressure-VIs/tree/main/MKS_946_VIs | Kenichi (& Zulkaida) | Yes | ||
| 9.1 | DAQ for MCC E-TC for | Sensor: Omega SA1 RTD * 2 | In-progress | Same as #9.2 | Kenichi | |||
| 9.2 | DAQ for Thermocouple: MCC E-TC | Sensor: Omega Type T, at target cave | Step #3 | https://github.com/uva-spin/Temperature-Pressure-VIs/tree/main/MCC_ETC_VIs | Kenichi, Reggie? | |||
| 10 | LakeShore218 (8 channels) | In-progress | Reggie | Yes | ||||
| 11 | LakeShore218 (Target Insert) | In-progress | Reggie | Yes | ||||
| 12 | Target Lifter | In-progress | Vibodha | |||||
| 13 | Basic Microwave motor controller | In-progress | Vibodha | |||||
| 14 | EIP Frequency counter | In-progress | https://github.com/uva-spin/e1039-target-controls/tree/master/Motor%20controller | Vibodha | ||||
| 15 | Magnet OVC | Pfeifer Vacuum | yes | Zulkaida | ||||
| 18 | Magnet PS | yes | https://github.com/uva-spin/e1039-target-controls/tree/master/Magnet-PS-Control Magnet Power Supply Operation | Zulkaida/David | ||||
| 19 | Shim PS | yes | https://github.com/uva-spin/e1039-target-controls/tree/master/Magnet-PS-Control Magnet Power Supply Operation | Zulkaida/David | ||||
| 20 | Mercury iTM | yes | Misha | |||||
| 21 | Mercury iTC | N2 level | yes | https://github.com/uva-spin/e1039-target-controls/tree/master/Magnet-PS-Control | Zulkaida | |||
| 22 | Maxigauge | yes | https://github.com/uva-spin/Temperature-Pressure-VIs/tree/main/Maxigauge%20VIs | Zulkaida | ||||
| 23 | EV105-N (Electronic valve) | Fairchite TA6000-104 | no (one Vi) | Zulkaida | ||||
| 24 | EV102-N (Electronic valve) | Asco 8222G 002LT | no (one Vi) | Zulkaida | ||||
| 25 | TE107-N (Temp. Sensor) | OmegaSA1 RTD | no (one Vi) | Zulkaida | ||||
| 26 | TE108-N (Temp. Sensor) | OmegaSA1 RTD | no (one Vi) | Zulkaida | ||||
| 27 | PT106-N (Pressure Sensor) | DWIER 626-11-GH-P1-E4-S1 | no (one Vi) | Zulkaida | ||||
| 28 | PT110-N (Pressure Sensor) | DWIER 626-11-GH-P1-E4-S1 | no (one Vi) | Zulkaida | ||||
| 29 | TPG361 | Pfeiffer Vacuum | Need testing | https://github.com/uva-spin/Temperature-Pressure-VIs/tree/main/TPG361_Version2 | Zulkaida |
Steps of VI Availability (Tentative)
- A few simple VIs for readout and configuration. It is to confirm that the device can be controlled with LabVIEW.
- A complete set of VIs for readout and configuration. Each VI should perform one function of the device.
- VIs for user interface.
- VIs for continuous measurement.
- VIs for continuous logging.
- Note that an integrated user interface (like PDP) for all the devices that we use will be considered in a future. We could use DQMH or CML DQMH.
Updateslabview_20210929
| Date | Title | Presenter | File |
|---|---|---|---|
| VIs for MCC E-TC | Kenichi | labview_20210810.pdf |
| Update on LN2 Bos | Vibodha | SCMeetig_August25.pptx |
| Zulkaida | ||
| Step count ADC length relationship | Vibodha | |
| Updates on slow control rack and target computer | Kenichi | labview_20210915.pdf |
| MKS 670 + PDP and LakeShore 218 + GPIB | Kenichi | labview_20210922.pdf |
| VIs for MCC E-TC | Kenichi | labview_20210929.pdf |
| VIs for MCC E-TC | Kenichi | labview_20211013.pdf |